Small Mini Portable Waterjet Cutting Machine with 1000*1000mm Cutting Table

Product Description

CE certification   METAL CUTTING MINI SMALL PORTABLE water jet cutting machine
   
 
Advantage:
 
1.37KW SIEMENS MOTOR
 
2.electric components
 
3.Seperated body to make more stable cutting effect and better accuracy after cutting a long time.
 
4.Free abrasive sand feeding system
 
5.We have the most convenient automatic abrasive sand removing and recycling system
 
6.imported American intensifier
 
7. Double anchor, an effective solution for the jitter of gravity when cutting, to ensure the accuracy.
 
8. Steel beams, after heat treatment, to prevent deformation
 
9. Bellows can effectively prevent dust, so airtight is better.
 
10. we assemble a oil tank for cutting table to make the the linear guider no need maintainence 
 
11.  Legitimate WINDOWS 7/10 system
 
12. SIEMENS PLC
 
13. Operating voltage can be 220/380/415V.
 
14.Linear guider and ball screw brand are HIWIN.
 
15. Servo variable pump  works more stablely.
 
16. Two years warranty for the whole machine. 
 
17.  we can do GEAR and Rack to make the moving speed increasing to 30m/min which will reduce your half using cost .
 
 
 
 

Main technical parameter of water jet cutting machine
Intensifier Pump	Item	Parameter
	Model	WMT3742Z
	motor	SIEMENS
	Method of Direction Regulation	Electronic direction regulation
	Pressure Range	50-420MPA, continuous pressure is 330-380Mpa
	Maximum Flow of Hydraulic Pump	90 L/min
	Maximum Discharge Capacity	3.7 L/min
	Maximum Diameter of Gem Nozzle	0.33 mm
	Power of Master Motor	37 KW
	Power Source	380V/50HZ, also work at 220V/60HZ, 415V
Cutting Table	Item	Parameter
	X axis Characteristic	use strong 10mm steel 1000MM cutting range. The cutting table width is 1200mm
	Y axis Characteristic	Cast iron is used as the foundation base , 1000MM cutting range . The cutting table length is 1200mm.
	Z axis Characteristic	Z axis double linear guide and four  sliding block , 170MM, CAN DO 200MM
	Control Accuracy	±0.01mm, cutting accuracy is  ±0.1mm, reposition accuracy:  ±0.02mm, max travelling speed: 6000mm/min, we have new technology that can make the travelling speed 30m/min.
	linear guider	TAIWAN TBI BRAND
	Table Ctructure	Separated body, can be delivered by one 20'FCL container
	Driving Way	Servo drive system
	CNC system	Ncstudio ,Fagor
	Servo Motor	SIEMENS motor
	Cutting Head	Casting structure and Concrete structure
	Sealing Way	soft dustproof cloth on X,Y, Z axis, the sealing result will be better, and there is a oil tank under the cutting table, the linear guider no need maintainence.
	Loading Weight Water Tank	Wall thickness is 6mm,using  fluorocarbon coating, Can antirust at least 5 years.
CNC Controller	Item	Parameter
	Control Method	CNC
	Display Size	19inch LCD
	Model of Cutting Text	DXF
	Model of Computer	Industrial Control Computer
	Operating System	Windows 7/10
	PLC	SIEMENS
	Cutting Software Advantage	Auto save and transfer common parameter
	Controller Displace	Can be fit to suitable place at own will
Automitic Abrasive Feeder	Item	Parameter
	Founction	Sand storage and sand delivery
	Operating	No need electrocnic control,sample operation
	Capacity	200 kg for 8 -10hours
	Pressure	0.3-0.6Mpa compresses gas pressure
	Color	White
Deionization System	Item	Parameter
	Water pressure	0.15Mpa~0.6Mpa
	Water temperature	5°C~50°C
	Environment temperature	5°C~50°C
	Relative humidity	≤95%(25°C)
	Water turbidity	<20FTU
Wireless Handle		Parameter
	Founction	Wireless controlling waterjet
	Display	Real- time display condition of X,Y,Z axis
	Settings	Zero point, on/off valve set,  X,Y,Z axis moving
	Technology	Advanced technology

 

 

Machine models: 

		WMT200 1010	WMT200 1212	WMT200 1515	WMT200 2515	WMT200 2540	WMT200 2560
Platform size	X-axis	1200mm	1400mm	1700mm	2700mm	2700mm	2700mm
	Y-axis	1200mm	1400mm	1700mm	1700mm	4200mm	6200mm
Cutting stroke	X-axis	1000mm	1200mm	1500mm	2500mm	2500mm	2500mm
	Y-axis	1000mm	1200mm	1500mm	1500mm	4000mm	2000mm
	Z-axis	150mm	150mm	150mm	150mm	150mm	150mm
Cutting accuracy		±0.1mm
Repeated positioning accuracy		±0.05mm
Driving mode		Ac servo
Maximum operating speed		50000mm/min

		WMT200 3015	WMT200 3020	WMT200 3112	WMT200 3515	WMT200 4020	WMT200 6020
Platform size	X-axis	3200mm	3200mm	3300mm	3700mm	4200mm	6200mm
	Y-axis	1700mm	2200mm	1400mm	1700mm	2200mm	2200mm
Cutting stroke	X-axis	3000mm	3000mm	3100mm	3500mm	4000mm	6000mm
	Y-axis	1500mm	2000mm	1200mm	1500mm	2000mm	2000mm
	Z-axis	150mm	150mm	150mm	150mm	150mm	150mm
Cutting accuracy		±0.1mm
Repeated positioning accuracy		±0.05mm
Driving mode		Ac servo
Maximum operating speed		50000mm/min

 

 

Advantages:

The X/Y axis uses a new labyrinth protection.

Japan River Valley automatic lubrication system.

Internal components adopt the German Schneider brand.

Absolute value motor, no zero detector, with power off memory function.

International brand AC servo drive power supply and motor.

60000psi (420mpa) intensifier pump

1.Type of pressurization is hydraulic. (The water is pressurized by using the fluid pressure intensification principle).

2.Max. oil discharge is 90 L/min

3.Max. water discharge is 3.8L/min

4.Max. diameter of orifice is 0.33mm

5.Max. operating pressure is 420MPa(60000 psi)

6.Continuous operating pressure is 350-380MPa

7.Power requirement : 37KW, 3 phrase, 380V/50HZ, can do 220V/415V.

8.Type of shift is electronic

9.Maintenance free accumulator is originally imported from TAIWAN.

10.Intensifier assembly is imported from USA

11.With SIEMENS motor and SIEMENS PLC and the motor is variable pump so that can reduce using cost.

12.all electric components are Schneider brand.

abrasive sand feeding system

Abrasive sand feeding system

No need electronic control, simple operation, reliable, maintenance-free
Can supply the cutting sand quantity 
Need less than 0.2Mpa compressed gas pressure. 220KG Sand can be used for 8-10 hours.

 

                           CNC controller

 

CNC control, apply 17 inch LCD
 Adopt specialized NCStudio water jet cutting software, have autosave function for next operation.
Apply SIEMENS PLC instead of relay, buttons are Schneider

can provide ITALY Imported ECS software which support more than 15 languages

 

60000 psi direct drive pump

 

 

oil chiller

 

 

cnc controller

 

 

AC 5 axis

 

 

water supply system

 

 

abrasive sand removal system

 

Cutting Speed

Material	Specification	Speed(mm/min)
		60000psi Servo direct drive pump	60000psi Hydraulic intensifier pump
Carbon steel plate	10mm	330	270
	12mm	280	220
	14mm	240	180
	16mm	200	140
	20mm	170	110
	22mm	140	85
Aluminum plate	12mm	800	600
	30mm	200	160
Glass	5mm	2000	1600
	8mm	1800	1400
	10mm	1500	1100
	12mm	1200	900
	14mm	1000	700
Ceramic tile	12mm	2000	1500
	14mm	1400	900
Microcrystal stone	16mm	1200	900
Marble	25mm	1000	800
	30mm	800	600

 

if use our 30kw 63000psi second-generation direct drive pump , the cutting speed will be as follows:  the cutting speed will be twice higher than with 420mpa intensifier pump.

MODEL            :WMT SDD II 40
MAX PRESSURE        :435MPa
Continuous working pressure   :370-380MPa
Max orifice diameter    :0.43mm 
Flow rate          :5.6 l/min
Inlet water pressure        :0.4MPa
Motor power      :30KW
Dimension        :1800mm X 900mm X 1200mm
Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc
Dual-row filtration system (5 Micron, 1 micron, in series)
Fully automatic servo control system, output pressure control mode
Intelligent start-stop function
Automatic shutdown for overpressure and automatic protection for underpressure
Power supply:380VAC, 50Hz , 3 Phase
 

material	thickness(mm)	Cutting pressure	Max cutting speed (mm/min)
Carbon steel	6	370	850
	8	370	650
	10	370	550
	16	370	300
	20	370	220
	30	370	140
	75	370	40
	100	370	22
	125	370	10
Titanium alloy	10	370	800
	20	370	260
	45	370	100
	100	370	26

aluminum	6	370	2500
	8	370	1800
	20	370	650
	30	370	350
	40	370	260
Stainless steel	6	370	850
	8	370	650
	13	370	500
	16	370	300
	56	370	45
glass	5	370	7000
	8	370	3000
	12	370	1600
	15	370	900
	19	370	650

 

 

 
 
DELIVERY AND PACKING
 
Soft packing
 
 
 
 After Service
We can provide overseas installation and training service. 24 hours in 7 days a week respond. and respond time is no more than 12 hours.
 
Provide two years warranty time for the whole machine .And easy-wear parts replace cost is very low.