About WAMIT waterjet cutting machine
1. CNC forming a variety of complex patterns;
2. Cold cutting, no thermal deformation or thermal effect;
3. Environmental protection, no pollution, no toxic gas and dust;
4. Can process a variety of high hardness materials, such as: glass, ceramics, stainless steel, etc., or relatively soft materials, such as: leather, rubber, diapers, etc.;
5. It is the only means for complex processing of some composite materials and fragile porcelain materials;
6. Smooth incision, no slag, no secondary processing;
7. Drilling, cutting and molding can be completed at one time;
8. Low production cost;
9. High degree of automation;
10.24 hours of continuous work
Waterjet servo direct drive pump
Performance and parameters
MODEL :WMT SDD II 40
MAX PRESSURE :435MPa
Continuous working pressure :370-380MPa
Max orifice diameter :0.43mm
Flow rate :5.6 l/min
Inlet water pressure :0.4MPa
Motor power :30KW
Dimension :1800mm X 900mm X 1200mm
Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc
Dual-row filtration system (5 Micron, 1 micron, in series)
Fully automatic servo control system, output pressure control mode
Intelligent start-stop function
Automatic shutdown for overpressure and automatic protection for underpressure
Power supply:380VAC, 50Hz , 3 Phase
Power is only 30kw, which can save you 60% to 70% of the cost
servo direct drive pump represents a new generation of high-efficiency, energy-saving ultra-high pressure pump, which is the first large R&D in China. Servo motor driven direct drive intensifier system.
ADVANTAGE OF WAMIT SECOND-GENERATION DIRECT DRIVE PUMP:
The second-generation WAMIT servo direct-drive pump adopts world most advanced technology and processes . Whether in terms of performance, quality, functionality or operation, there have been significant improvements. The features are summarized as follows::
1,Performance is efficient:The maximum pressure can reach 435MPa, with a continuous working pressure of 370-380MPa and pressure fluctuation range of ±0.5MPa. This continuous and stable high-pressure output increases the cutting speed by 50%-60% compared hydraulic intensifer pumps of the same pressure, significantly enhancing production efficiency.
2,Intelligent maintenance:This product is equipped with a remote control system, which can assist users with remote after-sales service, avoiding losses caused by improper settings.
3,more flow rate:The largest orifice diameter is 0.43mm, with a flow rate of 5.6L/min, allowing customers to achieve higher and quality when making precise cuts.
4,longer using life of easy-wear spare parts:The second-generation direct-drive pump adopts world-leading hard-sealing technology, greatly extending the service life of consumable parts, reducing the frequency of maintenance and lowering the usage cost..
5,Simplified maintenance:Adopting the new integrated assembly process, the maintenance time is reduced by 50%, making maintenance simpler and more convenient.
6,Easy to operate:Equipped with an HD touch screen, the parameters such as pressure, duration, mode, and speed are intuitively displayed, making adjustments simpler and convenient, enhancing the operational experience and work efficiency..
7,Automatic water supply:Equipped with an automatic water supply system, it monitors the water level in real time. If there is no continuous water supply, the system will emit a buzzing alarm; if the water level is too low, it will automatically shut down to avoid equipment damage caused by human error, thus further enhancing the reliability the equipment..
8,Intelligent alarm system :Configure multiple intelligent alarm systems, including servo driver alarm, water supply pressure alarm, maintenance alarm, water level alarm, oil pressure alarm, etc. alarm information will be displayed in real-time on the touch screen to help users quickly identify and resolve issues..
9,Digital platform system:Built-in remote digitalization platform system, users can monitor the operation status of the equipment in real time through mobile and web terminals. The system can statistics the daily operation time, working time, power consumption and income of the equipment, and warn of equipment problems in advance to ensure long-term stable operation of the machine.
10,Energy saving and electricity conservation :The power is only 30kw, compared to the hydraulic intensifier pump with the same flow and pressure (the power of the same hydraulic is 75kw), its energy efficiency is greatly improved. This advantage not only greatly reduces operating costs but also reduces energy consumption, meeting the modern manufacturing industry requirements for energy saving and emission reduction..
11,Environmental protection:It replaces traditional hydraulic systems, reduces the use of hydraulic oil, and is equipped with self-cooling functions, effectively reducing equipment pollution; low noise (noise does not exceed 75dB), the noise level is equivalent to that of ordinary diesel cars, and it is more environmentally friendly
12,Good design appearance:In addition to the rationality of its own structural design, the second-generation direct-drive pump, due to the absence of a hydraulic system, avoids problem of hydraulic oil leakage, eliminating oil pollution and making the equipment appearance cleaner and more tidy..
Specifications:
| Cutting Accuracy(mm) |
|
| Voltage |
380/220/400VAC, 50Hz ,3 phase |
| Rated Power |
30KW |
| Dimension(L*W*H) |
1800*900*1200mm |
| Weight (KG) |
800KG |
| water inlet pressure |
0.4MPA |
| Max. water discharge |
5.6L/min |
| Max. diameter of orifice |
0.43MM |
| Continuous operating pressure |
370-380Mpa |
| Max. operating pressure |
435MPa(63000 psi) |
| Pump type |
direct drive pump |
| Model |
|
After sales service
1. Maintenance free of charge for 12 months .
2. We will provide the consumable parts at an agency price.
3. 24 hours online service, free technical support.
4. Machine has been adjusted before delivery, operation disk is included in the delivery. If there is any other questions, pls kindly tell me.
5. We have manual instruction and Videos for software Installation, operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training, including working principle of machine, Auto CAD
drawing, common problems and solution, etc.
SHANDONG WAMI CNC TECHNOLOGY CO.LTD is the professional supplier of water jet cutting machine and relative parts. Our factory is located in JINAN city, SHANDONG province, China.
With more than 15 years development, we have more than 40 series of self-developed designs and molds, and obtain several patents on waterjet cutting machine. We also achieve the ISO and CE certificate.
Our machine has been in the international leading level. We have introduced laser interferometer and have more than 10 QC members to carry out strict inspection at each stage: incoming inspection (IQC), in-process inspection (IPQC) and final inspection (FQC). With our rich experience and considerate services, we have been recognized as a reliable supplier by many international buyers.
We can also work on your OEM/ODM projects by operating our in-house facilities. Our experienced engineers are adept at using 3D software, enabling us to meet your customized requirements. With an annual production capacity of more than 100 sets, we can fill your bulk orders with ease.
We take "Strict quality control, constant technology innovation, qualify and efficiency services" as our consistent business
principle. With the strict management and continuous improvement, we can supply the best solution of cutting by water jet. Please don't hesitate to contact us if you want to know more!
1. Are you manufacturer or trading company?
We are manufacturer of water jet cutting machine in JINAN city, Shandong, China.
2. What kind of material does your water jet cutting machine can cut?
There are plenty materials our water jet cutting machine can cut, such as stone, ceramic, quartz, glass, foam, plastic, rubber, copper, brass, aluminum, mild steel, pre-hardened steel, titanium, inconel and cast alloy.
3. What's your CNC water jet cutting machine's max. cutting thickness?
Generally speaking, if cut steel the max thickness of our water jet cutting machine can be up to 240mm, but we suggest cut no more than 150mm for smooth cutting. Now our Z axis distance is 170mm, we can customize for customers. Regular thickness please refer to: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm.
4. How we supply after-service?
Some countries we have after-service department, we will provide local service, if have no local service, we will arrange engineer for overseas installation and training. The installation and training time is generally 7-10 days. And we also can provide installation videos.
5. What's your delivery time?
Generally speaking is 30 days. if have stock, 7-15 days.
){kind=link}